Reno Nevada Journeyman Electrician (ICC - R17) Exam Prep - Live Virtual + Self Study Training

The live training schedule is organized around the books and technical references used on the exam.

Because this is a seminar-style training program that covers the 2023 National Electrical Code, electrical calculations, wiring methods, conductor ampacity, services, feeders, grounding, bonding, motors, transformers, generators, equipment, and special electrical conditions, you only need to attend the sessions covering the books included on your specific exam.

The live virtual classes complement the complete online course and recorded instruction. Students can begin with self-paced lessons, attend applicable live sessions for guided review, and return to the recordings whenever they need additional help with an NEC article, electrical formula, load calculation, conductor-sizing problem, grounding provision, motor requirement, transformer question, or reference-navigation method.

What You Get

• Complete Online Course: Organized self-study instruction covering the principal electrical subjects associated with the ICC R17 Journeyman Electrician examination.
• Recorded Classes: Recorded lessons that allow you to pause explanations, repeat calculations, and revisit difficult NEC topics according to your schedule.
• Live Virtual Classes: Scheduled instructor-led training organized around the 2023 National Electrical Code and the electrical subjects included with this product.
• NEC Navigation Guidance: Training focused on locating definitions, articles, tables, exceptions, calculations, and installation requirements in the 2023 National Electrical Code.
• Electrical Calculation Review: Preparation involving Ohm’s law, power, load calculations, conductor ampacity, voltage drop, box fill, raceway fill, services, feeders, motors, and transformers.
• Grounding and Bonding Review: Study support involving grounding electrode systems, equipment grounding conductors, bonding jumpers, service bonding, separately derived systems, and effective ground-fault current paths.
• Wiring Methods Preparation: Review involving raceways, cables, boxes, fittings, conductor support, environmental conditions, physical protection, and permitted installation methods.
• Equipment Review: Preparation covering motors, controllers, transformers, generators, appliances, heating equipment, lighting systems, disconnecting means, and electrical utilization equipment.
• Practice-Oriented Study Structure: Guidance for identifying the subject of a question, selecting the correct NEC location, completing the required analysis, and managing examination time.

Exam Details

The ICC R17 Journeyman Electrician examination is based on the 2023 National Electrical Code. The exam contains 80 multiple-choice questions, and candidates are allowed four hours to complete it.

The examination evaluates journeyman-level knowledge across a broad range of electrical systems and installation requirements. Candidates should be prepared for direct code questions, calculations, equipment applications, and problems requiring research across multiple NEC articles or tables.

Important preparation areas include:

• General electrical knowledge and theory
• Electrical definitions and terminology
• Services and service equipment
• Feeder calculations and installation requirements
• Branch circuits and required outlets
• Load calculations and demand factors
• Conductor ampacity and insulation ratings
• Temperature correction and adjustment factors
• Overcurrent protection
• Grounding and bonding
• Grounding electrode systems
• Raceways, cables, boxes, and fittings
• Box-fill and raceway-fill calculations
• Motors, motor circuits, and controllers
• Transformers and separately derived systems
• Generators and standby systems
• Lighting, appliances, and utilization equipment
• Special occupancies and hazardous locations
• Special equipment and special conditions
• Communications and limited-energy systems

Wiring methods and materials represent an important part of journeyman electrician preparation. Candidates should understand the permitted and prohibited uses of common raceways and cable systems, conductor support, protection from physical damage, wet-location requirements, box sizing, raceway fill, and installation restrictions.

Branch-circuit and conductor questions may involve connected loads, continuous loads, conductor sizing, required receptacles, lighting circuits, overcurrent protection, insulation ratings, terminal-temperature limitations, and equipment requirements.

Service and feeder questions may require candidates to calculate loads, apply demand factors, choose conductors, determine overcurrent protection, evaluate disconnecting means, and apply grounding and bonding rules. Practice should include dwelling and non-dwelling calculations.

Motor questions may require several steps. A candidate may need to determine full-load current, branch-circuit conductor size, short-circuit and ground-fault protection, overload protection, controller ratings, disconnecting means, and feeder requirements.

Transformer questions may involve primary and secondary conductor sizing, overcurrent protection, grounding, bonding, transformer installation requirements, and separately derived systems. Ugly's Electrical References can reinforce transformer ratios, current calculations, and other frequently used formulas.

With 80 questions and four hours available, candidates have an average of three minutes per question. Direct code questions may require less time, while calculations and multi-section research questions may require more. Timed practice helps develop an efficient and balanced testing pace.

Open Book Test

The ICC R17 Journeyman Electrician examination is an open-book test. Candidates may use qualifying references in accordance with current ICC contractor and trades examination policies.

The 2023 National Electrical Code is the primary examination reference. The National Electrical Code Handbook contains the complete NEC text along with explanatory material, making it useful for organized code study and preparation.

Open-book testing still requires strong familiarity with the code. Candidates should understand the NEC’s structure, including Article 100 definitions, the general requirements in Chapters 1 through 4, specialized provisions in Chapters 5 through 7, communications systems in Chapter 8, and calculation tables in Chapter 9.

Practice recognizing the likely article before beginning a search. Service questions commonly lead to Article 230. Grounding and bonding questions frequently involve Article 250. Motors are addressed in Article 430, transformers in Article 450, and generators in Article 445.

Ugly's Electrical References supports preparation involving formulas, conductor properties, voltage drop, grounding, motors, transformers, electrical units, and conversions. It should complement direct NEC study rather than replace familiarity with the code.

During timed practice, read the entire question before opening a reference. Determine whether it asks for a minimum, maximum, permitted, prohibited, or required condition. Locate the applicable rule, review nearby exceptions, and confirm that the answer matches the exact wording of the question.

Licensing Steps

1. Review Reno’s journeyman requirements. Confirm that the electrical work you intend to perform requires a Reno-recognized journeyman credential.
2. Select the accepted examination. Choose the ICC journeyman electrician examination based on the code cycle required for your credentialing goal.
3. Create or access your ICC account. Use your individual account to review the R17 examination listing and manage registration.
4. Review current testing policies. Confirm the testing format, identification requirements, calculator policy, approved references, and examination procedures.
5. Purchase and schedule the R17 examination. Complete the current ICC contractor and trades registration process.
6. Prepare the assigned references. Study the 2023 National Electrical Code Handbook and use Ugly's Electrical References for formula and calculation review.
7. Complete structured preparation. Review electrical theory, code navigation, services, feeders, branch circuits, wiring methods, grounding, motors, transformers, and equipment.
8. Take the examination. Complete the 80-question ICC R17 Journeyman Electrician examination within the four-hour time limit.
9. Obtain the official score report. Keep a copy of the examination result for submission with the journeyman identification-card application.
10. Apply for the Reno-recognized card. Submit the required application and official score documentation through the journeyman-card process identified by the City.
11. Maintain the credential. Complete the applicable renewal and continuing-education requirements before the journeyman card expires.

State Requirements

Nevada contractor licensing and Reno journeyman credentialing are separate regulatory matters. The Nevada State Contractors Board licenses electrical contracting businesses and qualifying individuals, while Reno requires appropriate credentials for individuals performing regulated electrical installations within city limits.

Reno states that electrical wiring or equipment installations, alterations, and additions must be performed by a person holding a valid journeyman certificate unless a listed exception applies.

Individuals performing apprentice electrical work must hold a card from an approved apprenticeship program. Limited exceptions may apply to qualifying homeowners, contractor-supervision arrangements, and certain reciprocal-license situations.

After passing the accepted examination, the candidate must complete the application process for a Reno-recognized journeyman identification card. The application requires official examination documentation and the supporting information required by the administering organization.

The journeyman identification card is valid for three years. Renewal requires completion of the applicable continuing education and submission of the renewal materials. An expired card may be subject to reinstatement requirements, and extended expiration may require retesting.

Passing the ICC R17 examination does not create a Nevada electrical contractor license or authorize the holder to operate an electrical contracting business. Contractor licensing is a separate process administered by the Nevada State Contractors Board.

Reno adopted the 2023 National Electrical Code with its current building-code package on July 1, 2025. The R17 examination and this training product use the same NEC edition, helping candidates study a code cycle aligned with Reno’s currently adopted electrical code.

Passing the examination does not automatically issue the local journeyman card. Candidates must complete the required application, submit the official score report, and satisfy all applicable local credentialing requirements.

Reference Books

• National Electrical Code Handbook, 2023
  The primary code reference for the ICC R17 examination. It includes the 2023 National Electrical Code text and explanatory material covering definitions, branch circuits, feeders, services, grounding, bonding, overcurrent protection, wiring methods, conductors, equipment, motors, transformers, generators, special occupancies, special equipment, and communications systems.
• Ugly's Electrical References
  A compact electrical reference supporting preparation involving formulas, conductor data, voltage drop, electrical units, grounding, motors, transformers, conversions, and commonly used trade calculations.

Test Information and Study Materials

Begin preparation by learning the organization of the 2023 NEC. Create focused study areas for services, feeders, branch circuits, conductor ampacity, overcurrent protection, grounding, bonding, wiring methods, equipment, motors, transformers, generators, and special installations.

Review electrical theory until the primary relationships are familiar. Practice voltage, current, resistance, power, series circuits, parallel circuits, alternating current, power factor, and voltage drop. Use Ugly's Electrical References to reinforce formulas and common electrical data.

Complete service and feeder calculations using the 2023 NEC. Practice general lighting loads, receptacle loads, appliances, continuous loads, motors, heating equipment, air-conditioning equipment, demand factors, neutral calculations, and conductor selection.

Study conductor ampacity carefully. Practice applying insulation ratings, terminal-temperature limitations, ambient-temperature corrections, adjustment factors, conductor-use restrictions, and equipment termination requirements.

Give grounding and bonding focused attention. Review grounding electrode systems, grounding electrode conductors, equipment grounding conductors, bonding jumpers, service bonding, separately derived systems, and effective ground-fault current paths.

Practice box-fill and raceway-fill calculations. Learn which conductors, clamps, fittings, equipment grounding conductors, and devices count toward box volume. Review how conductor quantities and raceway types affect permitted fill.

Complete timed practice with the 2023 NEC. Read the question, identify the topic, locate the likely article or table, apply the requirement, complete the calculation, and move forward. Mark difficult questions for later review instead of allowing one problem to consume too much testing time.

How Pass Your Nevada Contractor Exam Helps You Reach Your Goal

Pass Your Nevada Contractor Exam helps Reno journeyman electrician candidates turn a large electrical code and a broad technical examination into an organized preparation plan. The training connects electrical theory, calculations, code requirements, wiring methods, grounding, equipment, motors, transformers, and special installations with the subjects associated with the ICC R17 exam.

The complete online course provides flexibility for apprentices, electricians, maintenance professionals, electrical workers, supervisors, and experienced tradespeople. Recorded instruction allows students to repeat difficult lessons, revisit calculations, and review NEC navigation demonstrations whenever additional practice is needed.

Live virtual classes add instructor-led structure to the preparation process. Sessions are organized around the books and technical subjects, allowing students to attend the classes covering the references included with their examination product.

The training emphasizes organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, calculation skills, and confidence-building study structure. Students develop a repeatable method for identifying the topic, choosing the correct NEC location, applying the rule, completing the calculation, and checking the result.

Frequently Asked Questions

What is included with this Reno Nevada Journeyman Electrician exam prep program?

The program includes the complete online self-study course, recorded instruction, and scheduled live virtual classes covering the electrical code, calculations, wiring methods, equipment, and journeyman-level subjects included with the product.

What does R17 mean?

R17 is the ICC examination code for the Journeyman Electrician exam based on the 2023 National Electrical Code.

How many questions are on the ICC R17 examination?

The examination contains 80 multiple-choice questions.

How much time is allowed?

Candidates are allowed four hours to complete the examination.

Is the ICC R17 examination open book?

Yes. The R17 Journeyman Electrician examination is open book and uses qualifying references permitted under current ICC examination policies.

Which National Electrical Code edition does this course cover?

The exam prep program covers the 2023 National Electrical Code.

Does Reno require a journeyman electrician card?

Yes. Individuals performing regulated electrical installations, alterations, or additions within Reno must hold the appropriate journeyman or apprentice credential unless an applicable exception applies.

How long is the Reno journeyman identification card valid?

The Reno-recognized journeyman identification card is valid for three years and must be maintained through the applicable renewal process.

Which National Electrical Code does Reno currently enforce?

Reno adopted the 2023 National Electrical Code as part of its current code package on July 1, 2025.

Does passing the R17 examination create a Nevada contractor license?

No. Nevada electrical contractor licensing is a separate process administered by the Nevada State Contractors Board.

Does passing the examination automatically issue the Reno journeyman card?

No. Candidates must also submit the required application, official examination result, and supporting documentation through the local journeyman credentialing process.

Do I need to attend every live class?

No. Attend the sessions covering the books and electrical subjects included with your examination product while using the complete online course and recordings for continued review.