--- title: Nevada Plumbing Contractor (C-1D) Books Allowed in the Exam url: https://passyournevadacontractorexam.com/c-1d-plumbing/nevada-plumbing-contractor-c-1d-books-allowed-into-exam-package/ updated: 2026-11-10 site: Pass Your Nevada Contractor Exam description: Books Allowed in the Exam for the Nevada Plumbing Contractor (C-1D) exam: the references PSI allows in the exam room. $945. One-click checkout. --- [All licenses](https://passyournevadacontractorexam.com/) /[Plumbing, heating and air (C-1, C-21)](https://passyournevadacontractorexam.com/#mechanical) /[Plumbing Contractor (C-1D)](https://passyournevadacontractorexam.com/c-1d-plumbing/) /Books Allowed in the Exam Plumbing Contractor (C-1D) · Books Allowed in the Exam # Nevada Plumbing Contractor (C-1D) Books Allowed into Exam Package The Nevada Plumbing Contractor (C-1D) Books Allowed into Exam Package is the references PSI allows in the exam room for the Plumbing Contractor (C-1D) exam (Nevada), at $945, 10% off the $1,045 list price. Books ship from our fulfillment center, 1 Exam Prep. Buy now goes straight to secure checkout at 1 Exam Prep. $945 (was $1,045) Save 10% [Buy now, go to checkout](https://1examprep.com/cart/45815190519865:1?attributes%5BSite%5D=passyournevadacontractorexam.com&ref=passyournevadacontractorexam.com) - Secure checkout, fulfilled by 1 Exam Prep - Books ship from our fulfillment center, 1 Exam Prep - Questions before you buy? Call [(877) 775-9400](tel:+18777759400) ## Key takeaways - Books Allowed in the Exam: $945, down from $1,045. - For the Plumbing Contractor (C-1D) exam; the references PSI allows in the exam room. - Every Nevada contractor license needs the Business and Law (CMS) exam plus a trade exam for the classification, both given by PSI. - Books ship from our fulfillment center, 1 Exam Prep. Buying does not grant exam eligibility. Updated November 10, 2026 · prices checked against the 1 Exam Prep store ## What does the Books Allowed in the Exam include? - Books Allowed in the Exam: the references PSI allows in the exam room - Written for the Plumbing Contractor (C-1D) exam - Books ship from our fulfillment center, 1 Exam Prep The Books Allowed in the Exam costs $945 and is written for the Plumbing Contractor (C-1D) exam. Books ship from our fulfillment center, 1 Exam Prep, and Buy now takes you straight to checkout. ## About this Plumbing Contractor (C-1D) package Prepare for the **Nevada Plumbing Contractor (C-1D) examination** with a focused exam-room package that includes the code books candidates are permitted to use during the open-book trade test. This package includes the **Uniform Plumbing Code, 2018**, **NFPA 54 - Standard for National Fuel Gas Code, 2012**, **NFPA 58 - Standard for Liquid Petroleum Gas Code, 2014**, and **Uniform Mechanical Code, 2012**. The Nevada C-1D Plumbing Contractor examination covers a broad range of plumbing trade knowledge, including water supply, drain-waste-vent systems, gas piping, water heaters, venting, hydronics, backflow protection, traps, cleanouts, storm drainage, plumbing mathematics, and general plumbing requirements. Candidates should understand both the technical concepts and how to use the approved reference books efficiently under timed conditions. The examination is an **open-book test**. All four books included in this package are allowed into the exam room, giving candidates access to the principal code references used for plumbing, fuel gas, LP-Gas, and mechanical-system questions. The C-1D trade examination contains **80 questions**, allows **3 hours** for completion, and requires **56 correct answers** to pass. Because candidates must work through a large number of questions across multiple subjects, preparation should include both trade knowledge and strong reference-navigation skills. The package is designed for candidates who want the specific books allowed into the Nevada C-1D examination rather than a larger study package that includes supplemental references not permitted in the testing room. The **Uniform Plumbing Code, 2018** supports plumbing-system questions involving water supply, drainage, vents, fixtures, cleanouts, backflow, traps, storm drainage, and general code requirements. **NFPA 54** supports natural gas and fuel-gas topics, **NFPA 58** supports LP-Gas topics, and the **Uniform Mechanical Code, 2012** supports mechanical, hydronic, venting, and related system requirements. ## What You Get - **Uniform Plumbing Code, 2018** — approved exam-room reference for plumbing systems, water supply, DWV, fixtures, cleanouts, backflow, traps, storm drainage, and general requirements. - **NFPA 54 - Standard for National Fuel Gas Code, 2012** — approved exam-room reference for natural gas piping, appliance connections, combustion air, venting, testing, sizing, and fuel-gas requirements. - **NFPA 58 - Standard for Liquid Petroleum Gas Code, 2014** — approved exam-room reference for LP-Gas piping, regulators, containers, installation, and related safety requirements. - **Uniform Mechanical Code, 2012** — approved exam-room reference for mechanical systems, hydronic applications, venting, equipment, and related requirements. - **Open-Book Exam Preparation:** All four references in this package may be used during the Nevada C-1D trade examination. - **Focused Exam-Room Package:** The product includes the code books allowed into the exam rather than supplemental study-only books. ## Exam Details The Nevada **C-1D Plumbing Contractor** examination contains **80 questions**. Candidates are allowed **3 hours** to complete the examination and must answer **56 questions correctly** to pass. The examination content includes the following areas: - **Gas Systems:** 8 questions - **Cleanouts:** 4 questions - **Fixtures and Equipment:** 3 questions - **Hydronics:** 3 questions - **Water Heaters/Venting:** 6 questions - **Piping, Valves, and Controls:** 5 questions - **Water Supply:** 8 questions - **Hangers and Supports:** 4 questions - **Drain, Waste, and Vents:** 8 questions - **Backflow:** 4 questions - **Traps and Interceptors:** 4 questions - **Isometric Analysis/Plumbing Mathematics:** 6 questions - **Safety:** 5 questions - **Joints and Connections:** 3 questions - **Solar:** 3 questions - **General Plumbing Requirements:** 3 questions - **Storm Drainage:** 3 questions **Gas Systems**, **Water Supply**, and **Drain, Waste, and Vents** are among the largest individual exam categories. Candidates should devote substantial preparation time to these subjects and become familiar with the code books most likely to support them. The exam also includes plumbing mathematics and isometric analysis, meaning candidates should be prepared to interpret layouts, work through dimensions, and solve practical trade calculations without depending on the reference books for every step. ## Open Book Test The Nevada C-1D Plumbing Contractor examination is an **open-book test**. The following books in this package are approved for exam-room use: - **Uniform Plumbing Code, 2018** - **NFPA 54 - Standard for National Fuel Gas Code, 2012** - **NFPA 58 - Standard for Liquid Petroleum Gas Code, 2014** - **Uniform Mechanical Code, 2012** Candidates should use these references throughout preparation rather than waiting until test day to become familiar with them. Knowing which book is most likely to contain the applicable requirement can save valuable time. For example, questions involving drainage, water supply, traps, cleanouts, fixtures, and storm drainage will typically lead candidates toward the Uniform Plumbing Code. Natural gas and fuel-gas questions may require NFPA 54, while LP-Gas questions may require NFPA 58. Mechanical or hydronic questions may be supported by the Uniform Mechanical Code. With 80 questions in three hours, candidates have a little over two minutes per question on average. Searching through multiple code books without a clear plan can consume time quickly. Effective open-book preparation means learning the trade concepts first, then using the references strategically. Timed navigation drills can help candidates become faster. Choose a subject, identify the correct reference, locate the applicable section or table, and repeat the process until the book structure becomes familiar. ## Licensing Steps 1. **Confirm the C-1D classification.** Make sure Nevada Plumbing Contractor licensing matches the work the business intends to perform. 2. **Identify the qualifying individual.** The contractor application must identify the person providing the applicable trade qualification. 3. **Document qualifying experience.** Prepare the required work-history information for the C-1D classification. 4. **Submit the Nevada contractor license application.** Complete the applicable application and supporting documentation. 5. **Receive examination eligibility.** After the application and qualification information are reviewed, the qualifying individual can proceed with the required examinations. 6. **Prepare for the C-1D trade examination.** Study plumbing systems, gas systems, hydronics, water heaters, venting, calculations, safety, solar, and code navigation. 7. **Practice with the approved books.** Use the UPC, NFPA 54, NFPA 58, and UMC during preparation so code sections and tables become easier to locate. 8. **Prepare for Nevada Business and Law.** Contractor applicants must also satisfy the applicable Nevada business and law requirement unless an authorized waiver applies. 9. **Complete the required examinations.** Take the applicable trade and business examinations associated with the licensing process. 10. **Complete remaining licensing requirements.** Finish the additional requirements associated with issuance of the contractor license. ## State Requirements Nevada's **C-1D Plumbing** classification covers plumbing work involving sanitary conditions in buildings through a permanent supply of safe water and sanitary waste and vent systems. The classification also includes roof drainage systems, landscape irrigation systems, systems used to heat potable water including solar equipment, and hydronic heating systems not exceeding **200,000 British thermal units**. C-1D work also includes applicable gas supply systems and piping for compressed air, vacuums, and gases used for medical purposes. The scope reflects why the examination covers a wide range of plumbing, gas, hydronic, and mechanical subjects. For contractor qualification, Nevada generally requires the qualifying individual to have the applicable level of experience in the trade. The licensing process includes qualification, application, trade examination, business and law, and other requirements before the license is issued. The breadth of the C-1D classification makes code navigation especially important. Candidates should understand which systems fall under plumbing, fuel gas, LP-Gas, or mechanical requirements and which reference is most likely to provide the needed rule. ## Reference Books - **Uniform Plumbing Code, 2018** The approved exam-room reference supports preparation involving water supply, drainage, waste and vent systems, fixtures, cleanouts, traps, backflow protection, storm drainage, general plumbing requirements, joints, testing, and related code provisions. - **NFPA 54 - Standard for National Fuel Gas Code, 2012** The approved exam-room reference supports preparation involving natural gas piping, sizing, regulators, appliance connections, venting, combustion air, testing, and fuel-gas installation requirements. - **NFPA 58 - Standard for Liquid Petroleum Gas Code, 2014** The approved exam-room reference supports preparation involving LP-Gas containers, regulators, piping, fittings, system protection, installation, and related safety requirements. - **Uniform Mechanical Code, 2012** The approved exam-room reference supports preparation involving mechanical equipment, hydronic systems, venting, piping, combustion air, and other mechanical code topics relevant to the C-1D examination. ## Exam Room Approved Books - **Uniform Plumbing Code, 2018** Approved for use during the Nevada C-1D Plumbing Contractor examination and especially useful for water supply, drainage, venting, fixtures, cleanouts, backflow, traps, and storm drainage. - **NFPA 54 - Standard for National Fuel Gas Code, 2012** Approved for use during the examination for natural gas and fuel-gas piping, appliance, sizing, venting, combustion-air, and testing requirements. - **NFPA 58 - Standard for Liquid Petroleum Gas Code, 2014** Approved for use during the examination for LP-Gas piping, regulators, containers, clearances, and system requirements. - **Uniform Mechanical Code, 2012** Approved for use during the examination for applicable mechanical, hydronic, venting, and equipment-related requirements. ## Test Information and Study Materials A strong Nevada C-1D preparation plan should combine trade knowledge with deliberate reference-navigation practice. **Water Supply** should include sizing, pressure, materials, valves, distribution, supports, and protection. Candidates should practice locating applicable tables and requirements in the Uniform Plumbing Code. **Drain, Waste, and Vent Systems** should include drainage sizing, slope, venting, fixture units, cleanouts, traps, connections, and sanitary drainage principles. These topics are central to plumbing work and should be reviewed thoroughly. **Gas Systems** should be studied with both NFPA 54 and NFPA 58 nearby. Candidates should understand the difference between natural gas and LP-Gas systems and learn which reference applies to each type of question. **Water Heaters and Venting** should include appliance installation, venting, temperature and pressure protection, combustion-air provisions, clearances, and fuel-gas considerations. **Hydronics** should include hot-water heating principles, piping, controls, circulators, expansion, heat emitters, and general system operation. Candidates should also know when the Uniform Mechanical Code is the most useful reference. **Backflow** preparation should include protection of potable water systems, device selection concepts, cross-connection concerns, and applicable plumbing-code requirements. **Traps and Interceptors** should include trap function, seal protection, installation, prohibited configurations, and interceptor applications. **Cleanouts** should include access, location, spacing, sizing, and installation concepts. These questions often reward efficient code navigation. **Storm Drainage** should include roof drainage, conductor sizing, drainage pathways, and general storm-water handling concepts. **Plumbing Mathematics and Isometric Analysis** should be practiced repeatedly. Candidates should work through measurements, elevations, pipe sizing, areas, volumes, offsets, and related calculations until the steps become familiar. Code books can support certain values and tables, but the arithmetic itself should be practiced enough that candidates can perform it efficiently during the examination. A useful study method is to create separate practice sets for each allowed reference. One group can focus on UPC questions, another on NFPA 54, another on NFPA 58, and another on UMC topics. This helps build the habit of identifying the correct reference before starting a lookup. Choosing the wrong book can waste time even when the candidate understands the subject. Timed drills are also useful. Select a plumbing topic, identify the correct reference, and locate the applicable table or section as quickly as possible. Repeat difficult subjects until navigation becomes faster. ## More on test Information and Study Materials The index can be helpful, but candidates should also learn the general structure of each code. Knowing where major subjects are located can reduce the need for repeated searching. Definitions deserve attention because plumbing and fuel-gas terminology can affect the meaning of a question. If the wording is unclear, knowing how the code defines a term can help clarify the issue. Practice questions should be completed with the approved books nearby. Attempt the question first, decide whether a code lookup is needed, and then use the appropriate reference strategically. Candidates should also practice moving past difficult questions. With 80 questions in three hours, spending too long on a single table or code section can affect overall pacing. ## How Pass Your Nevada Contractor Exam Helps You Reach Your Goal Pass Your Nevada Contractor Exam supports Nevada C-1D Plumbing Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure. The Books Allowed into Exam Package focuses specifically on the **Uniform Plumbing Code, 2018**, **NFPA 54, 2012**, **NFPA 58, 2014**, and **Uniform Mechanical Code, 2012**, giving candidates the approved references they can use during the open-book examination. Pass Your Nevada Contractor Exam encourages candidates to work with all four books before exam day. Repeated use helps build familiarity with the table of contents, index, definitions, chapters, tables, and major code sections. Trade-focused preparation should connect each reference to the systems it governs. The UPC supports core plumbing topics, NFPA 54 supports natural gas, NFPA 58 supports LP-Gas, and the UMC supports mechanical and hydronic subjects. Practice-oriented study can help identify whether a candidate needs more technical review or faster code navigation. If the plumbing concept is unclear, additional subject study is needed. If the concept is understood but the code section takes too long to locate, timed navigation drills can become the priority. The goal is to help candidates approach the Nevada C-1D Plumbing Contractor examination with stronger plumbing knowledge, more efficient reference navigation, better time management, and a structured open-book preparation strategy without guaranteeing a passing score or licensing approval. ### How many questions are on the Nevada C-1D Plumbing exam? The Nevada C-1D Plumbing Contractor examination contains **80 questions**. ### How much time is allowed for the C-1D examination? Candidates are allowed **3 hours** to complete the examination. ### How many correct answers are required to pass? Candidates must answer **56 questions correctly** to pass the C-1D trade examination. ### Is the Nevada C-1D Plumbing Contractor exam open book? Yes. The Nevada C-1D examination is an **open-book test**. ### Which books are included in this package? The package includes the Uniform Plumbing Code 2018, NFPA 54 2012, NFPA 58 2014, and Uniform Mechanical Code 2012. ### Are all four books allowed into the exam? Yes. All four books included in this package are approved for use during the Nevada C-1D Plumbing Contractor examination. ### What does the Uniform Plumbing Code help me study? The UPC supports water supply, drainage, waste and vents, fixtures, cleanouts, traps, backflow, storm drainage, joints, and general plumbing requirements. ### What does NFPA 54 help me study? ## More on how Pass Your Nevada Contractor Exam Helps You Reach Your Goal NFPA 54 supports natural gas piping, sizing, regulators, appliance connections, venting, combustion air, testing, and related fuel-gas requirements. ### What does NFPA 58 help me study? NFPA 58 supports LP-Gas containers, regulators, piping, fittings, system protection, installation, and related safety requirements. ### What does the Uniform Mechanical Code help me study? The UMC supports mechanical systems, hydronic applications, venting, equipment, piping, combustion air, and related mechanical code requirements. ### Does the exam include plumbing mathematics? Yes. Isometric Analysis and Plumbing Mathematics accounts for **6 questions**. ### Does the exam include gas systems? Yes. Gas Systems accounts for **8 questions**. ### Does the exam include hydronics? Yes. Hydronics is included in the examination and is part of the broader C-1D plumbing scope. ### How should I study with four open-book references? Practice identifying which reference applies to each subject before beginning a lookup. Use timed questions to become familiar with the UPC, NFPA 54, NFPA 58, and UMC so you can move efficiently between books during the examination. ### Should I try to look up every answer during the exam? No. Build strong plumbing knowledge first and use the code books strategically when a specific requirement, table, definition, or section needs to be confirmed. ### Does this package guarantee that I will pass the Nevada C-1D exam? No. This package provides the approved exam-room references and supports organized preparation. Examination results depend on each candidate's experience, plumbing knowledge, study, calculation ability, code-navigation skills, and performance on test day. ## How does the Plumbing Contractor (C-1D) exam work? The Plumbing Contractor (C-1D) license comes from the Nevada State Contractors Board. You apply to the NSCB with your experience and financial statement, the Board sends an exam eligibility letter, and you book the CMS and the trade exam with PSI. Scores come right after the exam. - Every Nevada contractor license needs the Business and Law (CMS) exam plus a trade exam for the classification, both given by PSI. - The CMS is open book with the Construction Business and Law Manual for Nevada; trade exams are closed book except for the code references their outline allows. - PSI charges $95 for one exam portion, or $140 for a trade exam taken with the CMS, and you get three attempts before the application is void. - The Board sets a bond from $1,000 to $500,000 and a monetary limit on every license, based on your experience and financial statements. ## Other Plumbing Contractor (C-1D) options [**Book Package** Nevada Plumbing Contractor (C-1D) Exam Book Package $1,545](https://passyournevadacontractorexam.com/c-1d-plumbing/nevada-plumbing-contractor-c-1d-exam-book-package/) [Compare every Plumbing Contractor (C-1D) package →](https://passyournevadacontractorexam.com/c-1d-plumbing/) [Choose a different license →](https://passyournevadacontractorexam.com/) ### More plumbing, heating and air (c-1, c-21) [Plumbing and Heating Contractor (C-1)](https://passyournevadacontractorexam.com/c-1-plumbing-and-heating/) · [Heating, Cooling and Circulating Air Contractor (C-1F)](https://passyournevadacontractorexam.com/c-1f-heating-cooling-and-circulating-air/) · [Pipes and Vents for Gas Contractor (C-1G)](https://passyournevadacontractorexam.com/c-1g-pipes-and-vents-for-gas/) · [Water Heater Contractor (C-1H)](https://passyournevadacontractorexam.com/c-1h-water-heater/) · [Pipe and Duct Insulation Contractor (C-1C)](https://passyournevadacontractorexam.com/c-1c-pipe-and-duct-insulation/) · [Nevada exam FAQ](https://passyournevadacontractorexam.com/faq/) · [Study tips](https://passyournevadacontractorexam.com/blog/) ## Questions before you buy ### How much is the Nevada Plumbing Contractor (C-1D) Books Allowed into Exam Package? $945. The price at checkout is the one that applies, and it is shown before you pay. ### What is included? Books Allowed in the Exam: the references PSI allows in the exam room. Books ship from our fulfillment center, 1 Exam Prep. ### Is the Plumbing Contractor (C-1D) exam open book? Partly. The Business and Law (CMS) exam is open book with the Construction Business and Law Manual for Nevada. Trade exams are closed book except for the code references named in the PSI content outline for your classification, which is why the exam-room book packages are sold as allowed in the exam. ### Who issues the license or certification? It comes from the Nevada State Contractors Board (NSCB), with exams by PSI. Buying study material does not register you or make you eligible to test. ### Are these the real exam questions? No. Licensing exam questions are confidential. Courses and practice exams are original material written to the same subjects and format. ### How fast can I start? Online courses and practice exams arrive by email after purchase. Books ship from our fulfillment center, 1 Exam Prep; shipping options are shown at checkout. ## Sources - [NSCB: license examinations](https://www.nvcontractorsboard.com/licensing/license-examinations/) - [PSI: Nevada contractor management (CMS) bulletin](https://test-takers.psiexams.com/api/content/bulletin/304) - [NSCB: license bonds](https://nvcontractorsboard.com/bonds) - [NSCB: new license application](https://www.nvcontractorsboard.com/wp-content/uploads/2026/08/New-License-Application.pdf) Licensing facts checked against these pages; last updated November 10, 2026. Rules change, so confirm with the board before you apply. --- Source: https://passyournevadacontractorexam.com/c-1d-plumbing/nevada-plumbing-contractor-c-1d-books-allowed-into-exam-package/ Publisher: Pass Your Nevada Contractor Exam. Orders are fulfilled by 1 Exam Prep (https://1examprep.com). Phone (877) 775-9400, email sales@1examprep.com. Prices change; the product page and checkout show the current price.