Nevada Roofing Contractor (C-15A) Ultimate Exam Prep Rental

Prepare for the Nevada Roofing Contractor (C-15A) examination and licensing process with an Ultimate Exam Prep Rental package focused on roofing systems, steep-slope construction, membrane roofing, metal panel systems, spray polyurethane foam roofing, roof substrates, repairs, flashing, estimating, construction safety, rooftop photovoltaic considerations, building-code navigation, and Nevada Business and Law preparation.

The Ultimate package combines the complete listed technical reference set, highlighted and tabbed books, 1 year of course access, Application Service, practice-oriented exam preparation, roofing trade review, code-navigation support, and Nevada contractor Business and Law study in one organized solution.

The Nevada C-15A Roofing classification is regulated by the Nevada State Contractors Board. The classification covers qualifying installation, application, alteration, and repair of watertight and weatherproof materials used on roofs. Roofing work within the classification can involve asphalt, pitch, tar, felt, shakes, shingles, aluminum, tile, slate, urethane, and other qualifying roofing materials.

Preparing for the C-15A examination requires more than familiarity with one type of roof. Candidates should understand steep-slope roofing, membrane systems, metal panel roofing, spray polyurethane foam systems, roof substrates, repairs, elastomeric roofing, built-up bituminous roofing, sheet metal, flashing, rooftop photovoltaic conditions, estimating, carpentry-related roof construction, safety, and building-code requirements.

The approved exam-room reference included with this package is the International Building Code, 2018. Candidates should become comfortable navigating roofing-related code provisions because the C-15A examination is an open-book test with specific approved reference material.

The additional technical study references included with this Ultimate package are the NRCA Roofing Manual: Steep Slope Roof Systems, 2025; NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024; NRCA Roofing Manual: Membrane Roofing Systems; Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Roofing Construction and Estimating by Daniel Atcheson, 1995; NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018; and Carpentry and Building Construction, 2016.

The references support roofing knowledge, estimating, safety, roof-system construction, framing, photovoltaic-related roof conditions, and practical preparation, but they are not allowed into the C-15A trade examination.

The Construction Business and Law Manual for Nevada is also included for Contractor Management Survey and Nevada Business and Law preparation.

All included books are highlighted and tabbed. The organized format supports faster review, easier reference navigation, and more structured preparation throughout the study process.

Package Price: $1,960.

Refundable Deposit: $750.

More about this package

Total Due Today: $2,710.

Please allow up to 15 business days for Ultimate book package orders.

What You Get

• Included Book(s): International Building Code, 2018; NRCA Roofing Manual: Steep Slope Roof Systems, 2025; NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024; NRCA Roofing Manual: Membrane Roofing Systems; Code of Federal Regulations - 29 CFR Part 1926 (OSHA); Roofing Construction and Estimating, Daniel Atcheson, 1995; NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018; Carpentry and Building Construction, 2016; and Construction Business and Law Manual for Nevada.
• Highlighted & Tabbed Books: All included books are highlighted and tabbed.
• Course Access: 1 year of course access.
• Application Service: Included with this package.
• Package Price: $1,960 plus a refundable $750 book deposit, for a total due today of $2,710.

Exam Details

The Nevada C-15A Roofing Contractor trade examination is administered through PSI for qualifying candidates pursuing the classification through the Nevada State Contractors Board.

• Exam: Nevada C-15A Roofing Contractor
• Number of Questions: 50
• Time Allowed: 2 hours
• Minimum Passing Score: 38 correct answers
• Testing Provider: PSI

The examination covers major roofing knowledge areas, including safety, roofing substrates, steep roofing, roof repairs, elastomeric roofing, built-up bituminous roofing, sheet metal and flashing, and photovoltaic-related roofing considerations.

Steep Roofing represents the largest individual area of preparation. Candidates should review asphalt shingles, clay and concrete tile, wood shakes and shingles, slate, roof decks, underlayments, fastening methods, valleys, ridges, penetrations, flashing, drainage, and other installation details associated with steep-slope systems.

Roofing Substrates is another important area. Candidates should understand roof decks, substrate condition, preparation, compatibility, fastening surfaces, deterioration, structural concerns, and how the condition of the existing roof structure can affect performance.

Built-Up Bituminous Roofing and Elastomeric Roofing require knowledge of low-slope roof systems, membranes, insulation, surfacing, flashing, attachment, drainage, repairs, and installation practices. The NRCA roofing manuals provide useful study material for these topics.

Roofing Repairs requires candidates to recognize common roof problems and appropriate corrective approaches. Study should include leaks, damaged membranes, deteriorated flashing, failed fasteners, substrate problems, drainage issues, and conditions that reduce weather resistance.

Sheet Metal and Flashing may represent a smaller portion of the examination, but it remains essential to watertight roof construction. Candidates should understand flashing at walls, roof edges, penetrations, valleys, transitions, curbs, and other vulnerable locations.

Safety should receive serious attention because roofing work includes significant fall hazards, ladder use, scaffold work, material handling, tools, weather exposure, and other jobsite risks.

Open Book Test

The Nevada C-15A Roofing Contractor examination is an open-book test. The approved exam-room reference included with this package is:

• International Building Code, 2018

Candidates should become familiar with roofing-related provisions in the International Building Code before examination day. Effective open-book preparation involves learning how the code is organized and practicing targeted searches for requirements involving roof coverings, roof assemblies, materials, structural conditions, weather protection, and related building requirements.

An open-book examination still requires efficient time management. Candidates should not expect to search every answer from the beginning. A stronger strategy combines roofing knowledge with targeted use of the IBC when a precise code requirement needs to be confirmed.

The following included study references are not allowed into the C-15A trade examination:

• NRCA Roofing Manual: Steep Slope Roof Systems, 2025
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024
• NRCA Roofing Manual: Membrane Roofing Systems
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
• Roofing Construction and Estimating, Daniel Atcheson, 1995
• NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018
• Carpentry and Building Construction, 2016

The study-only references should be used to build technical knowledge before testing. The NRCA manuals reinforce multiple roof-system types, Roofing Construction and Estimating supports practical estimating and materials review, OSHA supports safety preparation, and Carpentry and Building Construction strengthens knowledge of roof framing, decking, sheathing, and related structural construction.

The photovoltaic roofing guidelines support preparation involving the interaction between roofing systems and rooftop photovoltaic components, including roof penetrations, flashing, drainage, access, and system performance.

Licensing Steps

The Nevada State Contractors Board regulates the C-15A Roofing Contractor classification. Passing the trade examination is one part of the complete Nevada contractor licensing process.

1. Confirm the C-15A classification. Determine that Roofing Contractor matches the scope of work the business intends to perform.
2. Identify the qualifying individual. Designate the person who will establish the applicable roofing experience and technical qualification.
3. Document qualifying experience. Prepare records demonstrating relevant roofing work within the requested classification.
4. Prepare the Nevada contractor license application. Organize the required business, qualifier, experience, financial, and supporting information.
5. Submit the application. The Nevada State Contractors Board reviews the application and qualification information before examination eligibility is established.
6. Complete applicable background requirements. Follow required fingerprint and background procedures.
7. Provide applicable financial information. Financial responsibility is evaluated as part of the licensing process.
8. Receive examination eligibility. Eligible applicants can proceed with the required testing after authorization.
9. Schedule the C-15A examination through PSI. Arrange the Roofing Contractor trade examination after eligibility is established.
10. Prepare for the technical exam. Study steep roofing, substrates, repairs, low-slope systems, flashing, safety, estimating, photovoltaic roofing considerations, and IBC navigation.
11. Prepare for Nevada Business and Law. Use the included Construction Business and Law Manual for Nevada for Contractor Management Survey preparation.
12. Complete applicable examinations. Meet the required trade and management qualification requirements unless an applicable waiver is approved.
13. Complete final licensing requirements. Address applicable financial responsibility, contractor bonding, and remaining Nevada State Contractors Board requirements.

Application Service is included with this Ultimate package to help organize the Nevada contractor licensing application process while candidates continue working through technical and Business and Law preparation.

State Requirements

The Nevada C-15A Roofing subclassification covers qualifying installation, application, alteration, and repair of watertight and weatherproof materials used on roofs. The authorized work can involve asphalt, pitch, tar, felt, shakes, shingles, aluminum, tile, slate, urethane, and other qualifying roofing materials.

Candidates should understand the scope of the classification before pursuing licensing. Nevada contractor classifications define the type of work a contractor may perform, so the C-15A scope should correspond with the roofing services the business intends to offer.

For the standard Nevada contractor licensing pathway, the Trade Qualified Individual generally must establish four years of qualifying experience within the 15 years immediately preceding the application.

Applicants should maintain organized experience records describing the roofing work performed, the responsibilities held, and the period during which that experience was obtained. Experience should relate directly to the classification being requested.

Nevada contractor licensing also includes management qualification. The Management Qualified Individual generally satisfies the Contractor Management Survey and Nevada Business and Law requirement unless an approved waiver applies.

Financial responsibility, background procedures, contractor bonding, and other licensing requirements are separate from the trade examination. Passing the C-15A trade exam alone does not complete the contractor licensing process.

Reference Books

• International Building Code, 2018
  Included Book: Highlighted and tabbed code reference supporting roofing assemblies, roof coverings, weather protection, structural conditions, materials, and other building-code topics relevant to C-15A preparation. This is the approved exam-room reference included with the package.
• NRCA Roofing Manual: Steep Slope Roof Systems, 2025
  Included Book: Highlighted and tabbed study reference covering steep-slope roofing systems, including shingles, tile, slate, wood shakes and shingles, roof decks, underlayments, materials, installation methods, and construction details. This book is not allowed into the C-15A trade examination.
• NRCA Roofing Manual: Metal Panel and SPF Roof Systems, 2024
  Included Book: Highlighted and tabbed study reference supporting metal panel roof systems and spray polyurethane foam roofing preparation. This book is not allowed into the C-15A trade examination.
• NRCA Roofing Manual: Membrane Roofing Systems
  Included Book: Highlighted and tabbed study reference supporting membrane roof systems, low-slope roofing concepts, materials, installation, details, and repairs. This book is not allowed into the C-15A trade examination.
• Code of Federal Regulations - 29 CFR Part 1926 (OSHA)
  Included Book: Highlighted and tabbed safety study reference supporting fall protection, ladders, scaffolds, personal protective equipment, tools, material handling, and other roofing jobsite safety topics. This book is not allowed into the C-15A trade examination.
• Roofing Construction and Estimating, Daniel Atcheson, 1995
  Included Book: Highlighted and tabbed study reference supporting roofing construction methods, materials, measurements, quantities, estimating, and practical roofing knowledge. This book is not allowed into the C-15A trade examination.
• NRCA Guidelines for Roof Systems with Rooftop Photovoltaic Components, 2018
  Included Book: Highlighted and tabbed study reference supporting roofing considerations associated with rooftop photovoltaic components, roof penetrations, flashing, drainage, access, and system performance. This book is not allowed into the C-15A trade examination.
• Carpentry and Building Construction, 2016
  Included Book: Highlighted and tabbed study reference supporting roof framing, structural wood components, roof decks, sheathing, carpentry practices, and related construction knowledge. This book is not allowed into the C-15A trade examination.
• Construction Business and Law Manual for Nevada
  Included Book: Highlighted and tabbed reference supporting Nevada Contractor Management Survey and Business and Law preparation.

All included books are highlighted and tabbed. The organization supports repeated review and helps candidates become more familiar with the structure of the references throughout preparation.

Please allow up to 15 business days for Ultimate book package orders.

Test Information and Study Materials

A productive C-15A preparation plan should devote significant attention to steep-slope roofing while also covering substrates, membrane systems, repairs, flashing, safety, estimating, and photovoltaic-related roofing conditions.

Prioritize steep-slope roofing. Review asphalt shingles, tile, slate, wood shakes and shingles, underlayments, roof decks, fastening, flashing, valleys, ridges, penetrations, and installation details.

Study roofing substrates. Understand roof decks, sheathing, surface preparation, structural conditions, deterioration, compatibility, and the way substrate problems can affect roof-system performance.

Review membrane and low-slope roofing. Study membrane systems, built-up roofing, elastomeric systems, insulation, attachment, flashing, drainage, and repairs.

Prepare safety for recall. OSHA is not allowed into the trade examination, so candidates should learn roofing safety concepts before test day, especially fall protection, ladders, scaffolds, PPE, tools, and material handling.

Practice IBC navigation. Work with the 2018 International Building Code under timed conditions and practice finding specific roofing requirements efficiently.

Study roofing estimating. Review roof measurements, materials, quantities, waste factors, and practical estimating concepts using Roofing Construction and Estimating.

Review rooftop photovoltaic conditions. Understand how photovoltaic components can interact with roofing systems, including penetrations, flashing, drainage, maintenance access, and roof performance.

Use timed practice questions. With 50 questions in two hours, candidates should develop a consistent pace and become comfortable balancing trade knowledge with targeted reference navigation.

How Pass Your Nevada Contractor Exam Helps You Reach Your Goal

Pass Your Nevada Contractor Exam supports Nevada C-15A Roofing Contractor candidates through organized study guidance, roofing trade-focused review, practice-oriented preparation, building-code navigation, Nevada Business and Law preparation, Application Service, and confidence-building study structure.

The highlighted and tabbed books create an organized roofing study library covering building codes, steep-slope roofing, membrane systems, metal panel roofing, spray polyurethane foam systems, estimating, safety, carpentry, photovoltaic roofing considerations, and Nevada contractor business law.

With 1 year of course access, candidates can revisit challenging subjects and focus additional preparation on weaker areas. A candidate experienced with shingle roofing may need more study in membrane or SPF systems, while another may need more work with estimating, flashing, safety, or code navigation.

Practice-oriented preparation helps identify subjects that need more review. Missed questions can reveal whether additional preparation is needed in substrates, steep roofing, repairs, elastomeric roofing, built-up systems, flashing, safety, or photovoltaic topics.

Reference-navigation preparation focuses on the International Building Code because it is the approved exam-room reference included with this package. Repeated navigation practice can help candidates become more efficient with roofing-related code provisions under timed conditions.

The NRCA manuals provide detailed study material across several roof-system types. Roofing Construction and Estimating reinforces practical estimating, OSHA strengthens construction-safety knowledge, and Carpentry and Building Construction supports preparation involving framing, roof decks, sheathing, and related structural conditions.

The included Construction Business and Law Manual for Nevada supports Contractor Management Survey preparation, helping candidates address the management side of Nevada contractor licensing alongside technical roofing preparation.

Application Service is included to help organize the Nevada contractor licensing application process while candidates continue studying for the C-15A trade and management requirements.

By combining highlighted and tabbed rental books, 1 year of course access, Application Service, roofing trade preparation, code navigation, estimating review, safety study, photovoltaic roofing preparation, and Nevada Business and Law study, the Nevada C-15A Ultimate Exam Prep Rental provides a comprehensive preparation solution for professionals pursuing the Roofing Contractor classification.

Frequently Asked Questions

What is included in the Nevada C-15A Ultimate Exam Prep Rental?

The package includes all listed roofing and code references, the Construction Business and Law Manual for Nevada, 1 year of course access, Application Service, highlighted and tabbed books, and structured C-15A exam preparation.

How much does the Nevada C-15A Ultimate package cost?

The package price is $1,960 plus a refundable $750 book deposit, for a total due today of $2,710.

Is the $750 book deposit refundable?

Yes. The $750 amount is identified as a refundable book deposit for this rental package.

Is the Nevada C-15A Roofing exam open book?

Yes. The Nevada C-15A Roofing Contractor examination is an open-book test with specific approved reference material.

Which book is allowed into the C-15A exam?

The approved exam-room reference included with this package is the International Building Code, 2018.

Are the NRCA roofing manuals allowed into the exam?

No. The NRCA roofing manuals listed with this package are study references and are not allowed into the C-15A trade examination.

Is OSHA allowed into the C-15A exam?

No. OSHA 29 CFR Part 1926 is used for safety preparation and is not allowed into the trade examination.

How many questions are on the Nevada C-15A exam?

The C-15A Roofing Contractor examination contains 50 questions.

How much time is allowed for the exam?

Candidates have two hours to complete the C-15A trade examination.

What score is required to pass?

The minimum passing score is 38 correct answers out of 50 questions.

What work does the Nevada C-15A classification cover?

The classification covers qualifying installation, application, alteration, and repair of watertight and weatherproof roofing materials within the scope established for the Nevada C-15A Roofing subclassification.

Are all included books highlighted and tabbed?

Yes. All books included with the Ultimate package are highlighted and tabbed.

Is the Construction Business and Law Manual for Nevada included?

Yes. The Construction Business and Law Manual for Nevada is included for Contractor Management Survey and Business and Law preparation.

Does the Ultimate package include 1 year of course access?

Yes. The Nevada C-15A Ultimate Exam Prep Rental includes 1 year of course access.

Is Application Service included?

Yes. Application Service is included with this Ultimate package.

How much qualifying experience is generally required?

More on frequently Asked Questions

For the standard Nevada contractor licensing pathway, the Trade Qualified Individual generally must establish four years of qualifying experience within the 15 years immediately preceding the application.

How long should I allow for the Ultimate book package order?

Please allow up to 15 business days for Ultimate book package orders.